| |
What'sNew
1st Teams Now Formed
X-Treme Tactical Is Excited To Announce That Our 1st Team . .
...more
CurrentNews
Army Of Ten Tournament
X-Treme Tactical PaintBall & DeAngelo Williams Of Carolina
Present . . .
...more
RecentEvents
Army Of Ten Sponsors
See Who Has Just Signed On For This Historic Event . . .
...more
|
|
X-7 Accessories
| |
Tippmann
X7 Flatline
Paintball Barrel
|
Item #
T210002 |
 |
The new X7 Flatline is a top of the line
barrel upgrade that can shoot up to 250 feet. Patented
technology creates back spin on the paintball for long and
accurate shots. This new look Flatline is integrated into the
marker and is a great add on accessory.
|
|
| |
|
Sale ! $99.95 |
| |
|
|
| |
Tippmann
X7 E-Grip Full Auto Upgrade
|
Item #
T210001 |
 |
The external mode X7 e-Grip can shoot up to 20 bps and features
5 firing modes including semi auto, turbo, 3-shot safety burst,
auto response and full safety auto.
New weatherproof system is great for woodsball play and can
change modes on the fly.
Internal mode system can also be set to semi-auto to allow the
e-Grip to meet regulations of any organized field event.
Requires 9 volt battery not included |
|
| |
|
Sale ! $129.95 |
| |
|
|
| |
Tippmann
X7 Response Trigger Full Auto Upgrade
|
Item #
T210006 |
 |
X7 Response Trigger is a patented rapid air-assisted firing
system that can shoot up to 15 BPS without batteries. An
easy add on accessory that is a perfect match for the X7
Cyclone Feed System.
|
|
| |
|
Sale ! $79.95 |
| |
|
|
| |
X7 XP5 FOREGRIP
|
Item #
T275050 |
 |
Not only does the mil-sim design of the X7 XP5 Foregrip
accurately reflect its military counterpart (MP5), but the XP5
grip is also made from the same rugged material used in actual
firearms, to provide stylish looks and reliable functionality
for your Tippmann X7 marker. The XP5 grip also comes with a
front sight that clamps onto the pre-molded grooves at the front
of the foregrip.
The grip can be easily installed in minutes, and doesn’t require
the need for any permanent modifications to your marker.
Comfortable and incredibly durable, the XP5 foregrip offers the
ultimate in realistic, mil-sim looks, functionality, and
dependability.
Technical Specs
- Length: 7.5 inches
- Width: 2.25-inches
- Material: Glass-filled nylon composite
- Also comes with XP5 front sight
|
|
| |
|
Sale ! $34.95 |
| |
X7 XP5SD FOREGRIP
|
Item #
T275052 |
 |
- Versatile, two-piece construction allows you to run
with two distinct mil-sim looks
- Shroud can easily be “unlocked” and removed (or
reattached) if desired
- Glass-filled nylon composite construction
- Accommodates 2-inch bottom rail mount
- Free floating design provides a secure attachment
point without the use of set screws or adapter sleeves that
can scratch and damage your barrel
Give your Tippmann X7 an intimidating military look and feel
with the XP-5 SD Foregrip and Shroud. Unlike other grips and
barrel shrouds, the XP-5 SD foregrip and shroud is free-floating
so it doesn’t require set screws, compression rings or adapter
sleeves and won't scar or damage the barrel on your X7.
The XP-5 SD Shroud is a versatile, two-piece shroud and foregrip
that gives you two distinct mil-sim options. Run with both the
shroud and foregrip, or “unlock” and remove the shroud, attach
the end cap, and run with just the foregrip.
Includes:
- XP-5 Foregrip
- XP-5 Shroud
- XP-5 End cap
- XP-5 Sight
|
Technical Specs
- Overall length is 14 inches, with a total of
10⅞ inches added to gun
- Outer Diameter: 2¼ inches at base; 1⅞ inch at
nose
- Inner Diameter: 1⅛ inch around barrel
|
|
|
| |
|
Sale ! $34.95 |
| |
Tippmann X7 9mm
Magazine Well for XP Magazines
|
Item #
T275063 |
 |
- High-strength nylon plastic composite construction
- Utilizes same attachment point as your stock X7 mag
well
- Accommodates small XP5 style magazines
This is the mag well needed if you’re looking to use a small
XP5 mag (curved or straight) with your Tippmann X7 paintball
marker. (The 9mm mag well is designed to accommodate the small
XP5 style magazines.)
Made from super-strong nylon plastic composite, the sturdy
little X7 9mm mag well is a snap to install and provides a
secure, stable attachment point for your XP5 mag. The X7 9mm mag
well utilizes the same attachment point as your stock X7 mag
well, and is built to handle the rigors of woodsball and
withstand any extreme weather conditions. |
|
| |
|
Sale ! $19.95 |
| |
Tippmann X7 MP5
Curved Magazine
|
Item #
T275057 |
 |
- Push-button release
- Great mil-sim looks
- Durable, glass-filled nylon
composite construction
- Strong enough to be used as a grip
- Designed to fit into the custom 9mm
mag well (sold separately)
Featuring its classic mil-sim MP5 design and super-sturdy
construction, the XP5 Curved Mag is a great-looking mod
that's strong enough to be used as a grip. The X7 XP5 Mag is
designed to fit into the custom
9mm mag well (sold separately), and features a
convenient push-button release. (The X7 9mm mag well
utilizes the same attachment point as the stock X7 mag
well.)
Technical Specs:
- Height: 7.5 inches
- Width: 1⅝-inches (side view)
- Depth: ¾-inch deep (front view)
NOTE:
To outfit your Tippmann X7 with the XP5 Curved Mag, you'll
need to purchase the X7 9mm mag well (sold separately).
|
|
| |
|
Sale ! $19.95 |
| |
Tippmann X7 MP5
Straight Magazine
|
Item #
T275054 |
 |
- Made from high-impact glass-filled nylon composite
- Strong enough to be used as a grip
- Convenient push-button release
- Designed to fit into the custom X7 9mm mag well (sold
separately)
Featuring classic mil-sim looks and rugged durability, the
XP5 Straight Mag is a sturdy mod that is strong enough to be
used as a grip. The XP5 Straight Mag features a push-button
release and is designed to fit into the custom X7 9mm mag well
(sold separately). (The X7 9mm mag well utilizes the same
attachment point as the stock X7 mag well.)
Technical Specs:
- Height: 7.5 inches
- Width: 1⅝ inches (profile/side view)
- Depth: ¾ inch deep (front view)
NOTE: To outfit your Tippmann X7 with the XP5 Straight
Mag, you'll need to purchase the X7 9mm mag well (sold
separately).
|
|
| |
|
Sale ! $19.95 |
| |
Tippmann X7 M16
SHORT MAG
|
Item #
T275055 |
 |
- Made from virtually “unbreakable” glass-filled nylon
composite
- Realistic mil-sim design
- Fits stock X7 mag well
- Height: 4-inches
Made from the same glass-filled nylon composite used in real
firearms, the M-16 Short Mag provides realistic mil-sim looks
and is extremely durable. The M-16 Mag is 4-inches in height and
fits into the stock mag well of the Tippmann X7. |
|
| |
|
Sale ! $19.95 |
| |
Tippmann X7 G36
Ultra Short MAG
|
Item #
T275056 |
 |
- Made from virtually “unbreakable” glass-filled nylon
composite
- Realistic mil-sim design
- Fits stock X7 mag well
- Height: 2-inches
Made from the same glass-filled nylon composite used in real
firearms, the M-16 Short Mag provides realistic mil-sim looks
and is extremely durable. The M-16 Mag is 2-inches in height and
fits into the stock mag well of the Tippmann X7. |
|
| |
|
Sale ! $19.95 |
| |
Tippmann X7 AK-47 Foregrip
|
Item #
T275048 |
 |
- Genuine mil-sim looks and durability
- Free-floating design does not require set screws or
compression rings that can damage your barrel
- Attaches easily and securely
- Super strong, glass-filled nylon construction
- Completely modular design
Does not require the use of any sink set-screws, compression
rings or adapter sleeves that scar your marker’s barrel. The
mil-sim foregrip is made from the same durable material as that
used in real firearms to provide long-lasting dependability on
the woodsball field.
Important Note: The X7 AK-47 front sight is sold separately. The
sight contains a 1-inch bottom rail mount and fits all standard
Tippmann paintball gun barrels.
Note: Because of the length of the X7 AK-47 foregrip,
a minimum barrel length of 14-inches is recommended.
Includes:
- AK-47 foregrip
- Foregrip end-cap
- AK-47 gas tube
|
|
| |
|
Sale ! $34.95 |
| |
X7 AK-47 SIGHT
|
Item #
T275058 |
 |
- Quick and easy installation
- Fits all standard Tippmann barrels
- Features a 1-inch bottom rail mount
- Extremely durable construction and accurate mil-sim
design
The X7 AK-47 front sight features a 1-inch bottom rail mount
to accommodate a tac light or any other tactical accessory of
your choice. The sight fits all standard Tippmann paintball gun
barrels and extends 2-inches above the barrel. Clamps easily and
securely in the pre-molded slots of the foregrip. |
|
| |
|
Sale ! $14.95 |
| |
Tippmann X7 AK-47
Magazine
|
Item #
T275053 |
 |
- Super tough, weatherproof glass-filled nylon
composite construction
- Ergonomic design
- Fits stock X7 mag well
Give your Tippmann X7 a realistic AK-47 look and feel with
the super tough, ergonomically designed AK-47 Mag. The curved X7
magazine (clip) is designed to fit into the stock mag well of
the Tippmann X7 and is constructed from strong, weatherproof
glass-filled nylon composite to withstand rugged play in extreme
conditions. |
|
| |
|
Sale ! $19.95 |
| |
X7 X36 FOREGRIP
|
Item #
T275051 |
 |
- Pre-molded rail slots
- Free-floating design
- Durable glass-filled nylon composite construction
- Accommodates six tactical rail mounts
- Simple installation
- Accurate mil-sim looks
Featuring the same high-strength, glass-filled nylon
composite construction used in all the X7 mods, the X36 Foregrip
offers classic G36 looks and timeless durability. Installation
is a snap and does not require any gun modifications or set
screws or compression rings that can damage your barrel.
The X7 foregrip has pre-molded rail slots that allow you to
conveniently clamp an X36 carry handle with rail, and the
versatile grip also features screw holes so you can attach a
rail mount for tactical accessories on the top and bottom of the
foregrip, as well as two rails on each side of the grip.
Note: Because of the length of the X36 foregrip, a
minimum barrel length of 14-inches is recommended.
|
|
| |
|
Sale ! $34.95 |
| |
X7 X36 CARRY HANDLE
|
Item #
T275061 |
 |
- Rail cutout accommodates hopper
- Great Looks and functionality
- Sight Peep Hole
- Weaver Rail Mount
The sturdy X7 G36 carry handle is a practical mil-sim mod for
your Tippmann X7 that features durable glass-filled nylon
construction, a sight peep hole and a weaver rail mount. The
handle clamps firmly to your marker (using the molded slots in
the X7) and has a contoured cutout to accommodate the Cyclone
Feed System’s EP (Enhanced Performance) hopper, giving you a
clear sight line down the barrel of the marker.
Technical Specs
- Length at Base: 12.5 inches
- Height: 2 inches
|
|
| |
|
Sale ! $29.95 |
| |
X7 X36 FOLDING STOCK
|
Item #
T275044 |
 |
- Provides stable mil-sim shooting platform to enhance
accuracy
- Convenient, versatile and reliable in the field
- Easy installation and solid attachment point
- Glass-filled nylon composite construction
- Extended stock enhances shooting accuracy
- Folded stock optimizes performance in tight, urban
settings
The X36 folding stock offers the benefits of compact
maneuverability, enhanced accuracy and long term durability. The
joint at the stock’s attachment point allows you to “fold” the
stock alongside the body of the marker to optimize
maneuverability when operating in confined urban setting, or you
can easily extend the stock at the push of a locking pin when
you need the stability offered by a full-length butt stock.
Since top woodsball players must adapt quickly to the varying
demands of woodsball games, it makes sense to have a marker that
can do the same.
The sturdy X36 folding stock is constructed from military-grade,
glass-filled nylon composite to ensure reliable, weatherproof
performance and a long lifespan. The stock is attached to the X7
marker by using the gun body’s rear push pins, providing a
reliable, solid attachment point. (No permanent gun
modifications are necessary to attach the stock.) |
|
| |
|
Sale ! $59.95 |
| |
X7 HANDLE, ROUND
VERTICAL GRIP
|
Item #
T275059 |
 |
The X7 Vertical Handle is ergonomically designed to provide a
comfortable, secure shooting platform, the X7 vertical handle
attaches easily to the bottom weaver rail mount on the X7
marker. Made from tough injection-molded plastic, the grip is
extremely durable and provides mil-sim looks and practical
functionality to your Tippmann / Special Ops X7 marker, and is
simple to install.
Technical Specs:
- Length: 5.5 inches
- Width: 2⅞ inches
- Material: Glass-filled nylon composite
|
|
| |
|
Sale ! $19.95 |
| |
X7 M16 FOREGRIP
|
Item #
T275050 |
 |
- Accurate mil-sim design
- Free-floating design is secure and
does not require the use of set screws, compression rings or
adapter sleeves that can scratch or damage your barrel
- Designed to accommodate two rail
mounts
The X7 M-16 Foregrip is a free-floating grip that
attaches securely to your marker without the use of set
screws, compression rings or adapter sleeves that can damage
your barrel. As a member of the comprehensive family of X7
mods, the M-16 foregrip is an interchangeable grip made from
extremely resilient glass-filled nylon composite with an
integrated aluminum hub, so its one-piece construction is
capable of withstanding the intense demands of repeated
woodsball play.
The foregrip is designed to accommodate two rail mounts
(screw holes provided at the top and bottom of the grip) so
you can utilize the tactical accessories of your choice.
NOTE: The X7 M-16 front sight must be purchased separately.
- M-16 foregrip
- M-16 sight with 1.75-inch bottom
rail mount. (Extends 2.5-inches above barrel.)
- End cap (for those who prefer not to
use the front sight)
- IMPORTANT NOTE: The M-16 front sight
is available separately, and not included with this kit. The
X7 M-16 front sight contains a 1.75-inch bottom rail mount
and fits all standard Tippmann barrels.
Note: Because of the length of the X7 M-16 foregrip, a
minimum barrel length of 14-inches is recommended
|
|
| |
|
Sale ! $34.95 |
| |
X7 M16 SIGHT
|
Item #
T275060 |
 |
- Durable glass-filled nylon composite
- Accurate mil-sim design
- Features a 1.75-inch bottom rail mount
- Fits all standard Tippmann barrels
The X7 M-16 Front Sight is made from durable glass-filled
nylon composite that can withstand virtually any beating you can
dish out on the woodsball field. The mil-sim sight is designed
to accompany the X7 M-16 foregrip and features a 1¾-inch rail
mount on the bottom of the sight so you can mount a tactical
accessory if you choose.
The M-16 front sight extends 2.5-inches above the top of the
barrel top and is designed to fit all standard Tippmann A-5
barrels. |
|
| |
|
Sale ! $14.95 |
| |
X7 COLLAPSIBLE CAR
STOCK
|
Item #
T275046 |
 |
- Versatile CAR stock offers six different positions,
ranging in length from 7.5 to 11.5"
- Easily adjustable during play
- High-strength, weatherproof construction
- Easy installation and solid attachment point
- Durable, glass-filled nylon composite construction
- Includes six-position tube, locking lever and stock
Offering six different positions, the adjustable mil-sim X7
CAR butt stock is a versatile X7 mod that provides both form and
function. The rugged X7 CAR stock can be adjusted during play,
providing a customizable, stable shooting platform that can
greatly enhance accuracy. Its glass-filled nylon composite
construction and convenient field adaptability make the CAR
stock a practical, durable butt stock that can be installed on
your Tippmann X7 quickly and easily. The stock length is
adjusted by simply depressing the position lever and extending
or retracting the position tube to the desired length and then
releasing the lever to “lock” the stock into position. The
marker’s rear push pins are used to provide a simple, yet solid
attachment point for the CAR stock. |
|
| |
|
Sale ! $99.95 |
| |
X7 M16 SIGHT
|
Item #
T275062 |
 |
- Durable glass-filled nylon composite
- Accurate mil-sim design
- Features a 1.75-inch bottom rail mount
- Fits all standard Tippmann barrels
The X7 M-16 Front Sight is made from durable glass-filled
nylon composite that can withstand virtually any beating you can
dish out on the woodsball field. The mil-sim sight is designed
to accompany the X7 M-16 foregrip and features a 1¾-inch rail
mount on the bottom of the sight so you can mount a tactical
accessory if you choose.
The M-16 front sight extends 2.5-inches above the top of the
barrel top and is designed to fit all standard Tippmann A-5
barrels. |
|
| |
|
Sale ! $19.95 |
X-TREME TACTICAL RESPECTS YOUR PRIVACY
We DO NOT rent, sell or exchange names or
personal information from our customer
database to other companies.
|
|
|
|
|
